Huepar SG550 - 550w Electric Spray Gun

• High Power HVLP Spray Gun: 550W HVLP Electric spray painter features 3 unique spray patterns which Include vertical circular and horizontal. Provide a precise spray pattern to create a smooth and superior finish, great for tables, chairs, fences, cabinets car, interior walls, or crafts.（We recommend thinning paint around 100DIN-S, large amount of spraying, higher operation efficiency）

• Paint Thinning : Please note that the maximum viscosity that this spray gun can spray is: 100din/sec。We recommend thinning paint below 100din/s, large amount of spraying, higher operation efficiency.

• Adjustable Flow Control and 4 Metal Nozzles:  Huepar Tools SG550 Paint Sprayer own 4 Metal Nozzles (Φ1.0/1.5/2.0/2.5mm). By replacing the appropriate nozzle and adjust the control valve knob to adjust the paint thickness, which is a perfect design to save your money spent on paint by reasonably control paint flow rate. Best spray distance: 100-300mm.

• Easy to Clean: Huepar Tools SG550 electric spray painter adopts a separate design and can be easily assembled without tools. With the included cleaning brush and plug needle, you can unclog any hardened paint left in the machine, ensuring you get the best possible spray every time.

• Upgraded Design: ABS anti-slip rubber is used on the handle of the machine, which makes your work smoother. Double sealing gaskets are used at the joint of the spout to ensure the sealing of the machine, and the paint sprayed out is more uniform. 

• Package Include : 1*Viscosity measuring cup, 4*Cooper nozzle, 1*Cleaning pin, 1*Cleaning Brush, 1*Paint strainers, 1*Air filter, 1*Container lid, 1*Seal gasket for front end, 1*Seal gasket for suction tube. If you encounter any problems, please contact us as soon as possible.

Huepar Tools SG550 Paint Sprayer Specifications

• Rated Voltage/Frequency: 120V/60Hz (UL)
• Power: 550W
• No-load Speed : 32000RPM
• Container Volume: 1000 ml (recommended to fill up to 800ml)
• Maximum Viscosity: 100 din/sec
• Maximum Flow: 800ml/min

Nozzle Size:

• 1 x Φ1.0mm cooper nozzle (optional)
• 1 x Φ1.5mm cooper nozzle (installed)
• 1 x Φ2.0mm cooper nozzle (optional)
• 1 x Φ2.5mm cooper nozzle (optional)
• Spray Gun Shell Material : ABS Plastic
• Length of Power Cord: 2M
• Net Weight: 1.2kg

We recommend thinning paint below 100DIN-S, large amount of spraying, higher operation efficiency.

Max Paint Thinning: Below 100din/s

• The spray gun cannot spray granular solid liquids such as diatom mud, diamond paint, imitation stone paint, real stone paint, putty powder, powder paint, etc.

• The spray gun can spray water-soluble paint. Such as latex paint, wood paint, water-soluble paint, etc.,

• The paint viscosity is lower than 30. Paint and blend paint need to be diluted with rosin before use, and can be used with various paints, pigments, coatings (such as floor and fence stains), latex, Sealants (lacquer sanding sealers, clear sealers), varnishes, wood preservatives, enamels, oils (gloss, oil stains, oil-based primers, oil enamels), water-based paints (emulsions), automotive paints and Smooth masonry paint.

• Please note: The maximum viscosity that this spray gun can spray is: 100din/sec. We recommend thinning paint below 100din/s, large amount of spraying, higher operation efficiency.

Spray Pattern Setting:

This spray gun has 3 different spray patterns: horizontal, vertical, and circular. The vertical and horizontal patterns are recommended for larger surfaces. The round spray pattern is recommended for small objects or areas, such as corners that are difficult to reach. Test each spray pattern to determine which is the most suitable for your spraying task.

Spraying Tips:

• Make sure you hold the spray gun vertical and parallel to the target area, keeping it at an optimum range of between 3.9" -11.8" (10cm - 30cm). Always begin spraying outside the target area to prime the trigger.

• To ensure complete spraying, you need to spray over the edge of the target area, which will prevent the edge of the target area from being too thin.

Flow Rate Adjustment:

• • This spray gun comes with an adjustable flow rate adjustment dial which locates on the rear of the trigger.
• • Simply turn the flow rate adjustment dial.
• Clockwise: to increase (+) the flow;
• Counterclockwise: to decrease (-) the flow.

How to clean:

• Unplug the power plug.

• Divide the spray gun. Press the Release button downwards, pull out the front part of the spray gun.

• Unscrew the container. Empty any remaining coating material back into the material tin.

• Clean the container and suction tube with a brush.

• Pour solvent or water into the container. Screw the container back on. Use only solvents with a flashpoint over 55°C .

 Easy to disassemble:

Package Include

• 1*Viscosity measuring cup,
• 4*Cooper nozzle, 1*Cleaning pin
• 1*Cleaning Brush, 1*Paint strainers,
• 1*Air filter, 1*Container lid
• 1*Seal gasket for front end
• 1*Seal gasket for suction tube

Max Paint Thinning: Below 100din/s

Please note: The maximum viscosity that this spray gun can spray is: 100din/sec. We recommend thinning paint below 100din/s, large amount of spraying, higher operation efficiency.

Product Application Scenes

If you want to improve your home, then you can apply the paint sprayer to but not limited to:

• Fences
• Interior walls
• Tables
• Chairs
• Cabinets
• ...

Checking before use(Important! ! !)

• 1. The maximum concentration of paint dilution should be 100din/s, please do not exceed this concentration;
• 2. The gasket inside the paint sprayer should be sealed and intact;
• 3. The straw should be tightened;
• 4. The paint should exceed the straw, preferably more than half of the container;
• 5. The container should be screwed on;
• 6. The sprinkler nozzles should be clean and unblocked, then tighten;
• 7. You can test spray it with clean water before using the paint.